SG90 9g Micro Servo Motor
130.00 ৳
In stock
SG90 9g Micro Servo Motor
FUNCTIONING OF THIS SG90
SG90 Servo rotates approximately 180 degrees (90 in each direction) and works just like the standard kinds but smaller. It will fit in small places. It comes with 3 horns (arms) and hardware.
TORQUE WEIGHTAGE
This SG90 generates 2.5 kg-cm (Approx) torque, and the motor can pull a weight of 2.5 Kg when it is suspended at a distance of 1 Cm. So as load suspended distance reduces load pulling capacity will increase.
PRODUCT APPLICATIONS
SG90 is a high torque motor that is commonly used in robotics and several other applications because it’s easy to control their rotation. Tower Pro SG90 Servo motor has a geared output shaft. SG90 also used as actuators in many robotic arms, or as a steering system in RC toys. Due to its lightweight, it can be used in multi-DOF robots like humanoids.
IN THE BOX
1 x TowerPro SG90 9g Mini Servo Motor with Cable
1 x Set of Horns
1 x Set of Screws
Related products
-
3CH Channels ESC Servo Tester
180.00 ৳Add to cartFeatures: There are 3 modes to check servos or ESC: Manual mode: turn the knob with different speed, check the reaction time; Neutral mode: make the servo go back to the neutral point; Automatic “window wiper” mode: make the servo swing like a window wipers in the biggest angle. It can connect 1-3 servos simultaneously …
-
Linkage Stopper / Rods holder
25.00 ৳Add to cartLinkage Stopper / Rods holder Features: 100% brand new and high quality. Diameter:1.2mm Color: Silver Material: Metal Package weight:2g Package Include: 1 x 1.2mm Linkage Stopper / Rods holder
-
Add to cart
Tower Pro MG995 Digital Metal Gear Servo for RC Car, Robot Servo 13 KG Torque. Specification: Dimension : 40mm x 19mm x 43mm Original box: NO Net weight: 69g Package weight: 75g Color: Black Operating Speed : 0.17sec / 60 degrees (4.8V no load) Operating Speed : 0.13sec / 60 degrees (6.0V no load) Stall …
-
Tower Pro SG90 9g Micro servo
180.00 ৳Add to cartSpecifications: Weight: 9g Dimension: 23×12.2x29mm Stall torque: 1.8kg/cm(4.8v) Gear: Nylon gear set Operating speed: 0.1sec/60degree(4.8v) Operating voltage: 4.8v Temperature range: 0℃_ 55℃ Dead band width: 1us servo wire length: 25 cm One Packet Include: 1 x Tower Pro SG90 Micro 9g servo 3 x Servo Horns 3 x Screw
-
Add to cart
Features: High quality and high cost performance. Metal Gear. 245mm connector wire. Less noice. Small size and light weight. With 3 sets of servo horns and fittings. Specification: Operating Speed (4.8V no load): 0.11sec/60 degrees Operating Speed (6.0V no load): 0.10sec/60 degrees Stall torque: 2.2kg/cm(4.8V);2.5kg/cm(6.0V) Operating Voltage: 4.8-6.0V Temperature Range: -30C~60C Dead band width: 5us …
