Category: Flight Controller, GPS,GSM & Wireless
Flight Controller, GPS,GSM & Wireless
Showing 1–24 of 30 results
-
Add to cart2.4G 2Dbi Wireless SMA GSM Antenna with Female Plug 2.4G 2Dbi Wireless SMA GSM Antenna- (Small L-Type) is having a compact profile and good overhead clearance. This antenna is equipped with a 2400 MHz frequency and with a gain of 2Dbi. The compact size and the high performance make this device bang for a buck. …
2.4G 2Dbi Wireless SMA GSM Antenna with Female PlugRead More
-
Add to cart3DR Radio Telemetry 433Mhz for Pixhawk & APM2.8 With Case This Telemetry radio set allows you to link to a flight controller such as the APM or Multiwii AIO via a USB equipped device such as a computer, laptop or tablet supporting a USB connection (OTG). The Radio set not only lets you see live …
3DR Radio Telemetry 433Mhz for Pixhawk & APM2.8 With CaseRead More
-
Add to cartArdupilot APM2.8 Flight Controller Combo APM V2.8.0 description: – This version eliminates the 1.0mm 6P SM06B GPS interface of V2.52 old version, and change it into DF13-4P I2C external compass interface. – Put DF13-5P GPS interface with external compass interface, convenient for the connection of GPS and externalcompass. – V2.52 I2C interface changes to multifunctional …
-
Add to cartArduPilot APM 2.8 Flight Controller with NEO-7M GPS Combo This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers. The APM 2.8 is a complete open source autopilot …
ArduPilot APM 2.8 Flight Controller with NEO-7M GPS ComboRead More
-
Read moreNX3 Aircraft Flight Controller Description: Voltage Range: 5-6V DC. Dimensions: 40mm x 25mm. Weight: 6.5g. Feature: 1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail. 2.Three Flight Modes supported: a. Rate Mode ,Rate Mode for offset correction. b. Hold Mode ,HOLD mode for attitude hold c. Gyro Off Mode,transsmiter control the …
-
Add to cartNodeMcu Lua ESP8266 Board with CP2102 SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Features: 1. Open-source 2. Interactive 3. Programmable …
-
Sale!
Add to cartRDM 6300 RFID Module 125KHZ RDM630 125KHz card mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. RDM630 Series non contact RFID module, use the advanced RF receiving circuit …
-
Sale!
Add to cartUblox NEO-6m GPS Module Ublox makes good gps. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings. The antenna is connected to module …
-
Add to cartHC-12 Wireless Transceiver Modules 433Mhz are wireless serial port communication modules, It is based on SI4463 RF chip, it has built in microcontroller, and can be configured using AT commands, Maximum output power is 100mW (20dBm) and receiver sensitivity differs from -117dBm to -100dBm, depending on transmission speed. It accepts 3.2V-5.5V and can be used with 3.3V …
-
Add to cartHC-08 CC2541 Bluetooth 4.0 BLE Module HC-08 CC2541 Bluetooth 4.0 BLE to UART transceiver module with transparent serial port to Arduino Bluetooth module. SH-HC-08 is a next generation, Class 2 Bluetooth 4.0 BLE module. It uses TI CC2541 Bluetooth 4.0 BLE Chip.Support the AT command, the user can according to the need to change the …
-
Sale!
Read moreDJI Naza M Lite Flight Controller with GPS Combo for RC FPV Drone Quadcopter Original DJI Naza M Lite Multi Flyer Version Flight Control Controller w/ PMU Power Module & LED & Cables & GPS & stand holder All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight …
-
Sale!
Add to cartThis is universal Glass Fiber Flight Controller Anti-vibration Set Shock Absorber APM/KK/MWC/PixHawk vibration damping mount has a list of useful applications, This provides the free camera mounting to Flight controller isolation. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment. …
-
Read moreJHEMCU F7 Flight Controller Dual Gyro AIO OSD 5V 8V BEC & Black Box 2-6S for RC Drone FPV Racing Multicopter Specification: Brand: JHEMCU Name: Dual Gyro F7 Flight Controller AIO OSD BEC Optional Version: Acro(Standard) Version ( Without Barometer & Blackbox & MPU6000) Input Voltage: 2-6S Lipo MCU: STM32F722RET6 216MHz IMU: MPU6000 & ICM20689, …
JHEMCU F7 Flight Controller Dual Gyro AIO OSD 5V 8V BEC for RC DroneRead More
-
Read moreOmnibus F4 Pro V3 Flight controller Built-in OSD Barometer for FPV Quadcopter Specification: Brand name: Airbot Item name: Omnibus F4 Pro V3 Flight controller SPI Gyro MPU6000 On-Board OSD (controllered by Betaflight, FC over SPI bus) MicroSD Blackbox Baro (BMP280) F4 Processor (F405) 5v3a SBEC Built-in Current Sensor On-Board Video Filter (only can supply 5V …
-
Read moreDIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter Specification: Item name: F405 Betaflight Flight Controller Input power: 10-28V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Firmware: Fury F4 OSD Mounting hole: 30.5*30.5mm Weight: 6g Package Included: 1 x DIATONE …
-
Read moreM3 6mm Nylon Standoff set M3 x 6mm Nylon White Screws Description: Size:3*6mm Material: Nylon M3 6x6mm Nylon White Hex Standoff Description: Screw Size:M3 Hex Support Length:6mm Screw Length:6mm Nylon White Hexagon Nut M3 Description: Name:Nylon Hexagon Nuts Type:M3 Package: 1 x M3 x 6mm Nylon White Screws 1 x M3 6x6mm Nylon Hex Standoff …
-
Read moreThe SP Racing F3 Deluxe Flight Controller for Multicopter runs on next-generation, ARM Cortex-M4 72MHz CPU to achieve quick and efficient flight calculations. The SP Racing F3 Deluxe Flight Controller builds on tried and tested software, processor and sensor technology to make your aircraft fly like it’s on rails. No-compromise I/O allows you to use …
-
Add to cartThe SP Racing F3 Acro Flight Controller gives you all the features you want, whether you’re into FPV racing, acrobatic flying or drone photography. The hardware was designed by the lead developer of Cleanflight to be more capable than the previous-generation STM32F1-based boards after hearing feedback from the Cleanflight users, contributors and top-pilots. The SP …
-
Select optionsAPM 2.8 Multicopter Flight Controller APM is an open source flight control, can you play APM well depend on individual ability. Player must have ability of basic knowledge of electrical,mechanical, and also needs a certain degree of mental capacity, financialand material resources, energy support. If you’re not ready, then We recommend that you prepare some introductory information first. …
-
Add to cartSpecification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Feature: Top Configuration -GPS decoder chip: Radiolink M8N GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much better than the similar products. Package Included: 1 X Radiolink M8N GPS SE100 Module 1 X GPS Stand
-
Read moreDescription: The 3DR Radio Telemetry 915Mhz is the ideal way to setup a telemetry connection between your APM and a ground station. Small, inexpensive and with great range, the 3DR radio uses an open source firmware which allows us to do things that cannot be done with other radios. Radio Features: – Very small size …
3DR Radio Telemetry 915Mhz for Pixhawk & APM2.8 With CaseRead More
-
Sale!
Add to cartUblox NEO-M8N GPS Module Features: Built-in compass GPS module Main chip: Ublox-M8N – With fast satellite searching speed and high precision – Includes round plastic shell and GPS folding support Package size: 15 x 12 x 2cm Package weight: 57g Packing Content: 1 x NEO-M8N Flight Controller GPS Module with Shell
