Jumper 2.4G ELRS TX Module AION NANO T-PRO
Original price was: 3,000৳ .2,600৳ Current price is: 2,600৳ .
In stock
Jumper 2.4G ELRS TX Module AION NANO T-PRO
Specification:
Product: jumper 2.4G ELRS TX module
Model Name: AION TX NANO
Screen: OLED screen
MCU: ESP32
RF output power: 10-500mw
Frequency range: 2.4GHz-2.5GHz
Firmware: ExpressLRS
Antenna: Directivity diamond antenna for better signal input
Working voltage: DC5-8.4v
Receive Max Refresh Rate: 500Hz
Menu button: 5 direction button
Voltage: DC6-8.4V
Current: <400mA Port: S port. Firmware update: via Wifi, UBC-C or Blue tooth The specifications: Dimensions: 17.2 x 8.8 x 4.3mm (L x W x H) Weight: 1.1g Number of channels: 16Ch Operating voltage range: 3.5V ~ 6V Operating current: 60mA @ 5V Operating Range: Full Range Distance: >8KM
Compatibility: Radios in ELRS 2.4 mode
binding procedure:
Bonding is the process of attaching a receiver to an RF transmitter/transmitter module. An internal transmitter
Or the external RF module can be linked to multiple receivers (do not use simultaneously). A receiver can only be
Connected to an RF module. Follow the steps below to finish the binding procedure.
- Put the Transmitter/RF Transmitter module into link mode
- Turn on the receiver, the green light on the receiver will flash, and the receiver will be in binding mode. On the radio, The green light on the receiver will always be on and the link is complete.
If the receiver is not bound within 20 seconds after power on, the receiver will power on in Wifi firmware upgrade mode, The green light will flash at the same time.
Security:
Failsafe is a useful feature that is for a preset channel output position whenever the control signal is lost for a period.
Follow the steps to configure the required channel security:
Failsafe for the receiver, ELRS RF mode settings can be configured through the radio interface, which does not support pulse, hold and customized three modes for each channel. radio go to: Model Setup/Internal RF/Failsafe
Package:
1 x Jumper 2.4G ELRS TX Module AION NANO T-PRO
You may also like…
-
CYCLONE Nano 2.4GHz ELRS Receiver
Original price was: 1,900৳ .1,500৳ Current price is: 1,500৳ .Add to cartCYCLONE Nano 2.4GHz ELRS Receiver 2400 RX – Ultra-Low Latency Experience the cutting edge of radio control with the CYCLONE ExpressLRS 2.4GHz Nano 2400 RX. Based on the revolutionarily open-source ExpressLRS project, this receiver provides a robust, high-refresh-rate link that outperforms traditional protocols in both speed and penetration. Probots™ ProSpec Grade Signal Performance Engineered for …
-
SpeedyBee Nano 2.4G ELRS Receiver
Original price was: 2,000৳ .1,600৳ Current price is: 1,600৳ .Add to cartSpeedyBee Nano 2.4G ELRS Receiver for FPV Long Range Drones SpeedyBee Nano 2.4G ExpressLRS ELRS Receiver for FPV Freestyle Long Range Drones DIY Parts Features: 1.Low latency, high refresh rate, ultra-light and ultra-small, ideal for FPV racing and long-distance FPV cruising. 2.These receivers can be placed almost anywhere due to their ultra-light and Nano size. …
-
Jumper AION-RX-MINI 2.4GHz ELRS Receiver V2 TCXO
Original price was: 2,500৳ .1,999৳ Current price is: 1,999৳ .Add to cartJumper AION-RX-MINI 2.4GHz ELRS Receiver V2 TCXO Specifications Dimension: 17.2*8.8*4.3mm (L x W x H) Weight: 1.1g Number of Channels: 16Ch Operating Voltage Range: 3.5V~6V Operating Current: 60mA@5V Operating Range: Full range Distance: >5KM Compatibility: radios in ELRS 2.4 mode Binding Procedure Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module …
-
Radiomaster RP3 V2 ExpressLRS 2.4ghz Receiver
Original price was: 3,300৳ .3,000৳ Current price is: 3,000৳ .Add to cartRadiomaster RP3 V2 ExpressLRS 2.4ghz Receiver The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience. The RadioMaster RP series of receivers are designed with size, ease of use and range in …










