Aocoda RC F405 V4 Flight Controller
3,999.00 ৳
In stock
Aocoda RC F405 V4 Flight Controller OSD Baro and BalckBox for Racing Drone
Specifications
- MCU: STM32F405RGT6, 168MHz, 1MB Flash
- Board V3.0-ICM Version: IMU: ICM42688 (SPI1)
- Board V3.0-MPU Version: IMU: MPU6888 (SPI1)
- Gyro: ICM42688P(SPI1)
- Baro: SPL06-001(I2C1)
- OSD: AT7456E(SPI2)
- Blackbox: 16MB(SPI3)
- Motor Output: 8ch
- 5x Uarts (1,2,3,4,5)
- 10x PWM outputs(including “LED strip” pad)
- 1x I2C
- 3x ADC (VBAT, RSSI, CURR)
- 3x LEDs for FC Status (Blue, Red) and 3V indicator(Red)
- Built-in inverter for SBUS input
- USB Type-C
- Dual camera input and free switching
- Receiver: ELRS/CRSF/S.BUS/Frsky/Futabayfysky/TBs Crossfre/DSMX
- DJI FPV OSD is supported by any spare Uart
Power
- Vbat Input: 12.6~33.6V (3~8S LiPo)
- BEC: 5V/2.5A, 9V/2.5A(Max.2.7A)
- No built-in Current Sensor
- Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot
Physical
- Dimensions: 37mm*37mm
- Mounting Hole: M3 30.5mm*30.5mm
- Weight: 9.4g
FC Firmware
- BetaFlight: AOCODARCF405V3
- INAV: AOCODARCF405V3
- ArduPilot(ChiBiOS): AOCODARCF405V3
Including
- F405 V4 FC*1
- 8PIN SH1.0mm connection cable*1
- M3 *8 shock-absorbing ball *4
.jpg)
Related products
-
DIATONE Mamba F405 Flight Controller
4,499.00 ৳Add to cartDIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter Specification: Item name: F405 Betaflight Flight Controller Input power: 10-28V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Firmware: Fury F4 OSD Mounting hole: 30.5*30.5mm Weight: 6g Package Included: 1 x DIATONE …
-
KK2.1.5 LCD Flight Control Board
4,600.00 ৳Add to cartKK2.1.5 LCD Flight Control Board (Red Switch) The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than …
-
DJI Naza M Lite Flight Controller with GPS Combo
17,000.00 ৳Add to cartDJI Naza M Lite Flight Controller with GPS Combo for RC FPV Drone Quadcopter Original DJI Naza M Lite Multi Flyer Version Flight Control Controller w/ PMU Power Module & LED & Cables & GPS & stand holder All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight …
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
Ublox NEO-6m GPS Module
600.00 ৳Add to cartUblox NEO-6m GPS Module Ublox makes good gps. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings. The antenna is connected to module …
-
SpeedyBee F405 V3 + 50A 4in1 Stack
8,499.00 ৳Read moreSpeedyBee F405 V3 + 50A 4in1 Stack Flight Controller MCU : STM32F405 IMU(Gyro) : BMI270 USB Port : Type-C Barometer : Built-in OSD Chip : AT7456E chip BLE Bluetooth : Yes, Supported DJI Air Port : 6-pin connector/ direct soldering. BetaFlight Cam Control : Yes(CC pad on the front side) Current Sensor Input : Supported …
