Aocoda RC F405 V4 Flight Controller
3,800.00 ৳
Out of stock
Aocoda RC F405 V4 Flight Controller OSD Baro and BalckBox for Racing Drone
Specifications
- MCU: STM32F405RGT6, 168MHz, 1MB Flash
- Board V3.0-ICM Version: IMU: ICM42688 (SPI1)
- Board V3.0-MPU Version: IMU: MPU6888 (SPI1)
- Gyro: ICM42688P(SPI1)
- Baro: SPL06-001(I2C1)
- OSD: AT7456E(SPI2)
- Blackbox: 16MB(SPI3)
- Motor Output: 8ch
- 5x Uarts (1,2,3,4,5)
- 10x PWM outputs(including “LED strip” pad)
- 1x I2C
- 3x ADC (VBAT, RSSI, CURR)
- 3x LEDs for FC Status (Blue, Red) and 3V indicator(Red)
- Built-in inverter for SBUS input
- USB Type-C
- Dual camera input and free switching
- Receiver: ELRS/CRSF/S.BUS/Frsky/Futabayfysky/TBs Crossfre/DSMX
- DJI FPV OSD is supported by any spare Uart
Power
- Vbat Input: 12.6~33.6V (3~8S LiPo)
- BEC: 5V/2.5A, 9V/2.5A(Max.2.7A)
- No built-in Current Sensor
- Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot
Physical
- Dimensions: 37mm*37mm
- Mounting Hole: M3 30.5mm*30.5mm
- Weight: 9.4g
FC Firmware
- BetaFlight: AOCODARCF405V3
- INAV: AOCODARCF405V3
- ArduPilot(ChiBiOS): AOCODARCF405V3
Including
- F405 V4 FC*1
- 8PIN SH1.0mm connection cable*1
- M3 *8 shock-absorbing ball *4
.jpg)



Related products
-
SIM900A GSM /GPRS Module + Antenna
900.00 ৳Add to cartSIM900A GSM /GPRS Module + Antenna SIM900A Modem can work with any GSM network operator SIM card just like a mobile phone with its own unique phone number. The SIM900A GSM/GPRS modem is plug and play modem with RS232 serial communication supported. Hence Advantage of using this modem will be that its RS232 port can …
-
ArduPilot APM 2.8 Flight Controller Combo
9,399.00 ৳ – 10,499.00 ৳Select optionsArduPilot APM 2.8 Flight Controller Combo Introduction: Eliminate V2.52 Version Old 1.0mm 6P SM06B GPS interface , changed to the DF13-4P compass external I2C interface, Place the DF13-5P GPS interface with external interfaces of the compass , more convenient to connections GPS with external compass. Replaced the V2.52 I2C interface to multi-purpose MUX interfaces, which …
-
DIATONE Mamba F405 Flight Controller
6,000.00 ৳4,499.00 ৳Add to cartDIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter Specification: Item name: F405 Betaflight Flight Controller Input power: 10-28V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Firmware: Fury F4 OSD Mounting hole: 30.5*30.5mm Weight: 6g Package Included: 1 x DIATONE …
-
NX3 Aircraft Flight Controller
2,800.00 ৳2,300.00 ৳Read moreNX3 Aircraft Flight Controller Description: Voltage Range: 5-6V DC. Dimensions: 40mm x 25mm. Weight: 6.5g. Feature: 1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail. 2.Three Flight Modes supported: a. Rate Mode ,Rate Mode for offset correction. b. Hold Mode ,HOLD mode for attitude hold c. Gyro Off Mode,transsmiter control the …
-
SpeedyBee F405 V4 BLS 55A Stack
10,000.00 ৳Read moreSpeedyBee F405 V4 BLS 55A Stack Elevate your drone’s performance with the SpeedyBee F405 V4 Stack, featuring STM32F405 MCU and ICM42688P gyro for precise control. The compact F405 V4 flight controller supports Bluetooth configuration and 6S LiPo power input, making it a versatile choice for FPV enthusiasts. Paired with the SpeedyBee BLS 55A 4-in-1 ESC, …
-
HC-06 bluetooth module
370.00 ৳Add to cartThis is a bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. The HC-06 module is a slave only device. This means that it can connect to most phones and computers with bluetooth but it cannot connect to other slave only devices …








