A3144 Hall Effect Sensor
15.00 ৳
In stock
A3144 Hall Effect Sensor
Features:
- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
- Lead Free Package: TO-92
- Datasheet
Related products
-
Add to cartThis precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. Specifications: Size: 21mm x 18mm 1.8V …
-
Add to cart
HW-586 Li-ion Lithium Lead-acid Battery Capacity Tester Resistance Discharge Meter Description: Material: Electrical components HW-586 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results Maximum support 15V 3A discharged through the discharge voltage …
HW-586 Li-ion Lithium Lead-acid Battery Capacity TesterRead More
-
Fingerprint Scanner Sensor JM-101
1,100.00 ৳Add to cartFingerprint Scanner Sensor JM-101 The sensor is relatively easy to use with any TTL capable microcontroller or system. Although this is not the exact same sensor, it is compatible with the fantastic tutorial Adafruit has put together (just note that the pinout from the connector is different!). There is also free Windows-based software available – …
-
L293D Motor Driver Shield
220.00 ৳Add to cartDescription: L293D Motor Driver/Servo Shield for Arduino This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V ”hobby” servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino”s pin9 and …
-
Sonar Distance Sensor (HC-SR04)
80.00 ৳Add to cartUltrasonic sensors overcome many of the weaknesses of IR sensors – they provide distance measurement regardless of color and lighting of obstacles. They also provide lower minimum distances and wider angles of detection to gaurantee that obstacles are not missed by a narrow sensor beam. Measurement Procedure & Formula: Distance measurements can be made with …
-
Add to cart
XL6009 Step Up Power Module DC-DC Boost Converter With Display Feature: Length: 60mm Width: 35mm Height: 13.5mm Weight: 24g Input Voltage: 3-32V Output Voltage: 5-35V Output Current: 4A(MAX) Output Ripple: 50mV (Higher voltage, larger current and ripple) Switching Frequency: 400KHz (LM2577 only 50KHz) Operating Temperature: -45 to +85 degree centigrade Transfer Efficiency: less than or …
XL6009 Step Up Power Module DC-DC Boost Converter With DisplayRead More
