Foxeer M10Q 250 V2 GPS IST8310 Compass Module

Description

Foxeer M10Q 250 V2 GPS IST8310 Compass Module

Introducing the M10Q GPS Module from Foxeer. The module is built on the latest 10th-generation U-Blox M10050 chip, which delivers exceptional performance and accuracy. It operations over 72 channels on GPS, GLONASS and BDS. It supports dual protocols NMEA and UBLOX. The module has a built-in battery which facilitates hot starts and quick positioning. Furthermore, the module also features a built-in Magnetometer (compass) sensor. This module is 25x25mm in size.

Key Features:
M10 (10th Gen) Chipset for fast and stable positioning.
Supports multi-constellation GNSS (GPS, GLONASS, BDS, GALILEO, ESBAS, QZSS).
Dual protocol (NMEA / UBLOX) compatibility for flexible integration.
High sensitivity receiver: Trace -166 dBm, Capture -160 dBm.
IST8310 compass with plug orientation CW 180° flip.
Built-in battery for quicker satellite re-acquisition.
Wide operating temperature: -40°C to +85°C, storage up to +105°C.
LED status indicator:
Constant green = power on.
Flickering green = positioning accuracy achieved.
Easy connection with flight controllers via UART and I²C.
Supports Betaflight (v4.3.0 or above) with OSD GPS configuration.

Specifications:
Chip: M10Q (10th Generation)
Frequency: GPS L1, GLONASS L1, BDS B1, GALILEO, ESBAS L1, QZSS L1
Input Voltage: 5V
Antenna: Ceramic Antenna
Channel: 72
Battery: Built-in
Compass: IST8310
Compass Orientation: Plug facing flight direction, antenna up, CW 180° flip
Baud Rate: 115200bps
Protocol: Dual NMEA / UBLOX
Output Frequency: 1Hz – 10Hz (10Hz default)
Speed Accuracy: 0.05 m/s
Horizontal Positioning Accuracy: 2D ACC 1.5m (outdoor)
Receiver Sensitivity: Trace -166 dBm; Capture -160 dBm
Dynamic Characteristics Height: 50,000 m; Speed: 500 m/s; Acceleration: 4G
Operating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +105°C
Weight: 12 g
Size: 25 × 25 × 8 mm

Installation & Configuration:
Connect GPS to any UART of the flight controller (example: UART3).
Enable GPS in Betaflight Configurator, select UBLOX protocol, and configure auto baud and auto settings.
Verify GPS icon is active after power-on.
In OSD settings, enable GPS sats, longitude/latitude, speed, and home direction as required.
For best performance, place GPS in an open, unobstructed outdoor area to ensure fast satellite lock.

Applications:
The Foxeer M10Q-250 V2 GPS is ideal for FPV racing drones, long-range UAVs, aerial photography platforms, and industrial drones, providing precise navigation, return-to-home reliability, and telemetry integration.

Included:
– Foxeer M10Q 250 V2 GPS IST8310 Compass Module
– Accessories