Ublox NEO-M8N GPS Module
3,000.00 ৳ 2,200.00 ৳
In stock (can be backordered)
Ublox NEO-M8N GPS Module
Features:
Built-in compass GPS module
Main chip: Ublox-M8N
– With fast satellite searching speed and high precision
– Includes round plastic shell and GPS folding support
Package size: 15 x 12 x 2cm
Package weight: 57g
Packing Content:
1 x NEO-M8N Flight Controller GPS Module with Shell
Related products
-
APM Pixhawk Power Module With XT60
650.00 ৳599.00 ৳Add to cartAPM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …
-
GPS Folding Stand
350.00 ৳299.00 ৳Add to cartDescription: Item Name:GPS Folding Stand Dimension:12cm x 10cm x 10cm Material: aluminum turning + CNC manufacturing Usage:for NEO 6M, M7, M8, SE100, T100 GPS module. Package Included: 1 x GPS Folding Stand
-
Radiolink SE100 v2 GPS Module with Stand
5,000.00 ৳4,200.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
Aocoda-RC F7 DUAL Flight Controller
6,000.00 ৳4,999.00 ৳Read moreAocoda-RCF7DUAL flight controller BMI270 30.5MM 3-6S BEC Betaflight is the latest flight controller from Aocoda-RC Aocoda-RC F722Dual MCU:STM32F722RET6 IMU:MPU6000/BMI270 (Optional) barometer:DPS310 BlackBox:16MB Motor output:8CH motor output UART: 5CH serial ports Input voltage:12V-25.2V(3-6SLipo) BEC:5V/2.5A,9V/3A Dimensions:37mm×37mm Mounting hole: 30.5mm×30.5mm Weight:9.0g Firmware:AOCODARCF7DUAL Package Includes: 1 x Aocoda-RC F7 DUAL Flight Controller 4 x Shock Absorber 2 x 8 …
-
Pixhawk PX4 2.4.8 Flight Controller
15,000.00 ৳12,599.00 ৳Add to cartPixhawk PX4 2.4.8 Flight Controller 32 Bit ARM for Multicopters Specification: The board integrates with PX4FMU+PX4IO Pixhawk is with new 32 bit chip and sensor technology Processor: 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit Main frequency: 256K, 168MHZ RAM 32 bit STM32F103 backup co processor Sensor: L3GD20 3 …
-
HC-06 bluetooth module
370.00 ৳Add to cartThis is a bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. The HC-06 module is a slave only device. This means that it can connect to most phones and computers with bluetooth but it cannot connect to other slave only devices …