Ublox NEO-M8N GPS Module
2,200.00 ৳
In stock (can be backordered)
Ublox NEO-M8N GPS Module
Features:
Built-in compass GPS module
Main chip: Ublox-M8N
– With fast satellite searching speed and high precision
– Includes round plastic shell and GPS folding support
Package size: 15 x 12 x 2cm
Package weight: 57g
Packing Content:
1 x NEO-M8N Flight Controller GPS Module with Shell
Related products
-
SpeedyBee F405 V3 + 50A 4in1 Stack
8,499.00 ৳Read moreSpeedyBee F405 V3 + 50A 4in1 Stack Flight Controller MCU : STM32F405 IMU(Gyro) : BMI270 USB Port : Type-C Barometer : Built-in OSD Chip : AT7456E chip BLE Bluetooth : Yes, Supported DJI Air Port : 6-pin connector/ direct soldering. BetaFlight Cam Control : Yes(CC pad on the front side) Current Sensor Input : Supported …
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
SP Racing F3 Acro Flight Controller
2,800.00 ৳Add to cartSP Racing F3 Acro Flight Controller The SP Racing F3 Acro Flight Controller gives you all the features you want, whether you’re into FPV racing, acrobatic flying or drone photography. The hardware was designed by the lead developer of Cleanflight to be more capable than the previous-generation STM32F1-based boards after hearing feedback from the Cleanflight …
-
DIATONE Mamba F405 Flight Controller
5,500.00 ৳Add to cartDIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter Specification: Item name: F405 Betaflight Flight Controller Input power: 10-28V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Firmware: Fury F4 OSD Mounting hole: 30.5*30.5mm Weight: 6g Package Included: 1 x DIATONE …
-
OMNIBUS F4 V3S Plus Flight Controller
3,899.00 ৳Add to cartOMNIBUS F4 V3S Plus Flight Controller F4 V3S Plus Flight controller: Item name: F4 V3 PLUS Flight Controller Firmware: OMNIBUSF4SD Size: 36x36mm Mounting holes: 30.5×30.5mm STM32 F405 MCU Dshot support Drag and Drop OSD configured via Betaflight MPU: MPU6000 (Send at random) SBUS / PPM AND Spketrum DSMX ports MicroSD card blackbox Baro (BMP280) 5v3a …
-
APM 2.8 Flight Controller Side Pin/Straight Pin
6,900.00 ৳ – 6,999.00 ৳Select optionsAPM 2.8 Multicopter Flight Controller APM is an open source flight control, can you play APM well depend on individual ability. Player must have ability of basic knowledge of electrical,mechanical, and also needs a certain degree of mental capacity, financialand material resources, energy support. If you’re not ready, then We recommend that you prepare some introductory information first. …
