Ublox NEO-M8N GPS Module
2,200.00 ৳
In stock (can be backordered)
Ublox NEO-M8N GPS Module
Features:
Built-in compass GPS module
Main chip: Ublox-M8N
– With fast satellite searching speed and high precision
– Includes round plastic shell and GPS folding support
Package size: 15 x 12 x 2cm
Package weight: 57g
Packing Content:
1 x NEO-M8N Flight Controller GPS Module with Shell
Related products
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
DJI Naza M Lite Flight Controller with GPS Combo
15,999.00 ৳Add to cartDJI Naza M Lite Flight Controller with GPS Combo for RC FPV Drone Quadcopter Original DJI Naza M Lite Multi Flyer Version Flight Control Controller w/ PMU Power Module & LED & Cables & GPS & stand holder All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight …
-
Add to cart
NX4-PRO RC plane Flight Controller Stabilizer For RC Airplane Aircraft Fixed Wing V-tail Description: Item: Flight controller board Input voltage: DC 5 – 6V Working temperature: 0-50 ° C Performance: horizontal self-stabilization, manual flight, 3D lock. Suitable for: Ordinary T-tail fixed wing, single aileron, double aileron (requires remote control to set mixing control), delta wing …
-
Ublox NEO-6m GPS Module
600.00 ৳Add to cartUblox NEO-6m GPS Module Ublox makes good gps. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings. The antenna is connected to module …
-
NX3 Aircraft Flight Controller
2,300.00 ৳Read moreNX3 Aircraft Flight Controller Description: Voltage Range: 5-6V DC. Dimensions: 40mm x 25mm. Weight: 6.5g. Feature: 1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail. 2.Three Flight Modes supported: a. Rate Mode ,Rate Mode for offset correction. b. Hold Mode ,HOLD mode for attitude hold c. Gyro Off Mode,transsmiter control the …
-
Aocoda RC F405 V4 Flight Controller
3,800.00 ৳Read moreAocoda RC F405 V4 Flight Controller OSD Baro and BalckBox for Racing Drone Specifications MCU: STM32F405RGT6, 168MHz, 1MB Flash Board V3.0-ICM Version: IMU: ICM42688 (SPI1) Board V3.0-MPU Version: IMU: MPU6888 (SPI1) Gyro: ICM42688P(SPI1) Baro: SPL06-001(I2C1) OSD: AT7456E(SPI2) Blackbox: 16MB(SPI3) Motor Output: 8ch 5x Uarts (1,2,3,4,5) 10x PWM outputs(including “LED strip” pad) 1x I2C 3x ADC (VBAT, RSSI, CURR) 3x LEDs for FC Status …
