GPS Folding Stand
299.00 ৳
In stock
Description:
Item Name:GPS Folding Stand
Dimension:12cm x 10cm x 10cm
Material: aluminum turning + CNC manufacturing
Usage:for NEO 6M, M7, M8, SE100, T100 GPS module.
Package Included:
1 x GPS Folding Stand
Related products
-
Pixhawk PX4 2.4.8 Flight Controller
12,599.00 ৳Add to cartPixhawk PX4 2.4.8 Flight Controller 32 Bit ARM for Multicopters Specification: The board integrates with PX4FMU+PX4IO Pixhawk is with new 32 bit chip and sensor technology Processor: 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit Main frequency: 256K, 168MHZ RAM 32 bit STM32F103 backup co processor Sensor: L3GD20 3 …
-
Add to cart2.4G 2Dbi Wireless SMA GSM Antenna with Female Plug 2.4G 2Dbi Wireless SMA GSM Antenna- (Small L-Type) is having a compact profile and good overhead clearance. This antenna is equipped with a 2400 MHz frequency and with a gain of 2Dbi. The compact size and the high performance make this device bang for a buck. …
2.4G 2Dbi Wireless SMA GSM Antenna with Female PlugRead More
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
APM Pixhawk Power Module With XT60
599.00 ৳Add to cartAPM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …
-
2.4GHz Wireless Module NRF24L01
130.00 ৳ – 330.00 ৳Select options2.4GHz Wireless Module NRF24L01 with antenna or without external antenna Description: The real GFSK monolithic transceiver chip Built-in hardware and link layer Automatic response and automatic retransmission function Address and CRC check function Channel switching time is very short, can be used for frequency hopping Fully compatible with nRF24XX series The global open ISM frequency …
-
Aocoda-RC F7 DUAL Flight Controller
4,999.00 ৳Read moreAocoda-RCF7DUAL flight controller BMI270 30.5MM 3-6S BEC Betaflight is the latest flight controller from Aocoda-RC Aocoda-RC F722Dual MCU：STM32F722RET6 IMU:MPU6000/BMI270 (Optional) barometer:DPS310 BlackBox:16MB Motor output:8CH motor output UART: 5CH serial ports Input voltage:12V-25.2V(3-6SLipo) BEC：5V/2.5A,9V/3A Dimensions：37mm×37mm Mounting hole: 30.5mm×30.5mm Weight：9.0g Firmware:AOCODARCF7DUAL Package Includes: 1 x Aocoda-RC F7 DUAL Flight Controller 4 x Shock Absorber 2 x 8 …
