DIATONE Mamba F405 Flight Controller
7,000.00 ৳ 5,500.00 ৳
Only 1 left in stock (can be backordered)
DIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter
Specification:
Item name: F405 Betaflight Flight Controller
Input power: 10-28V (3-6S)
BEC: 5V/1.5A
MCU: STM32F405
Gyro: MPU6000
Flash: 16MB
OSD: AT7456
Firmware: Fury F4 OSD
Mounting hole: 30.5*30.5mm
Weight: 6g
Package Included:
1 x DIATONE Mamba F405 Flight Controller
Related products
-
SIM800L Quad Band GSM/GPRS Shield
450.00 ৳380.00 ৳Add to cartSIM800L Quad Band GSM/GPRS Shield Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(download/upload) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports Real Time Clock Supply voltage range 3.4V ~ 4.4V Supports A-GPS Supports 3.0V to 5.0V logic level Low power consumption, 1mA in sleep …
-
NX4-PRO RC plane Flight Controller Stabilizer
2,500.00 ৳1,999.00 ৳Add to cartNX4-PRO RC plane Flight Controller Stabilizer For RC Airplane Aircraft Fixed Wing V-tail Description: Item: Flight controller board Input voltage: DC 5 – 6V Working temperature: 0-50 ° C Performance: horizontal self-stabilization, manual flight, 3D lock. Suitable for: Ordinary T-tail fixed wing, single aileron, double aileron (requires remote control to set mixing control), delta wing …
-
SIM900A GSM /GPRS Module + Antenna
1,500.00 ৳899.00 ৳Add to cartSIM900A GSM /GPRS Module + Antenna SIM900A Modem can work with any GSM network operator SIM card just like a mobile phone with its own unique phone number. The SIM900A GSM/GPRS modem is plug and play modem with RS232 serial communication supported. Hence Advantage of using this modem will be that its RS232 port can …
-
KK2.1.5 LCD Flight Control Board
4,500.00 ৳4,300.00 ৳Add to cartKK2.1.5 LCD Flight Control Board (Red Switch) The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than …
-
Radiolink SE100 v2 GPS Module with Stand
5,000.00 ৳4,499.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
Aocoda-RC F405 V2 Flight Controller
4,800.00 ৳3,999.00 ৳Add to cartAocoda-RC F405 V2 Flight Controller Product parameters: Name: Aocoda-RC F405 V2 special flight controller Main control chip: STM32F405RGT6 MPU: MPU6500 Character overlay: AT7456E Black box: integrated 16M Flash Barometer: BMP280 Serial port: 4 optional Motor output: 8 channels optional LED strip: support Buzzer: support Input voltage: 3-6S Lipo Power output: 5V/2A, 9V/2A Weight: 6.0g Size: …