DIATONE Mamba F405 Flight Controller
4,499.00 ৳
Available on backorder
DIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter
Specification:
Item name: F405 Betaflight Flight Controller
Input power: 10-28V (3-6S)
BEC: 5V/1.5A
MCU: STM32F405
Gyro: MPU6000
Flash: 16MB
OSD: AT7456
Firmware: Fury F4 OSD
Mounting hole: 30.5*30.5mm
Weight: 6g
Package Included:
1 x DIATONE Mamba F405 Flight Controller
Related products
-
Add to cartNodeMcu Lua ESP8266 Board with CP2102 SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Features: 1. Open-source 2. Interactive 3. Programmable …
-
DJI Naza M Lite Flight Controller with GPS Combo
14,999.00 ৳Add to cartDJI Naza M Lite Flight Controller with GPS Combo for RC FPV Drone Quadcopter Original DJI Naza M Lite Multi Flyer Version Flight Control Controller w/ PMU Power Module & LED & Cables & GPS & stand holder All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight …
-
Pixhawk PX4 2.4.8 Flight Controller
12,500.00 ৳Add to cartPixhawk PX4 2.4.8 Flight Controller 32 Bit ARM for Multicopters Specification: The board integrates with PX4FMU+PX4IO Pixhawk is with new 32 bit chip and sensor technology Processor: 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit Main frequency: 256K, 168MHZ RAM 32 bit STM32F103 backup co processor Sensor: L3GD20 3 …
-
2.4GHz Wireless Module NRF24L01
130.00 ৳ – 330.00 ৳Select options2.4GHz Wireless Module NRF24L01 with antenna or without external antenna Description: The real GFSK monolithic transceiver chip Built-in hardware and link layer Automatic response and automatic retransmission function Address and CRC check function Channel switching time is very short, can be used for frequency hopping Fully compatible with nRF24XX series The global open ISM frequency …
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Read moreRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
APM Pixhawk Power Module With XT60
599.00 ৳Add to cartAPM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …
