Description
1.3 inch OLED Display Module for Arduino/Pi/ESP32
OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
This 1.3″ I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino.
Specifications:
Display Size: 1.3 inch
Resolution: 128 x 64 pixels
Display Type: OLED (self-emissive, no backlight)
Driver IC: SH1106
Interface: I2C (SDA, SCL)
Logic/Power: 3.3V–5V
Active Area: 29.42 x 14.7 mm
Module Size (PCB): 33.7 x 35.5 mm
Viewing Angle: >160°
Operating Temp: -20°C to 60°C
Storage Temp: -30°C to 70°C
Typical Power: ~0.06W (content dependent)
Colors: Blue or White
Compatibility: Arduino, Raspberry Pi, STM32, ESP32
Common I2C Address: 0x3C (check PCB jumpers)
Note: SH1106 differs from SSD1306—use libraries that support SH1106 (e.g., U8g2).
Features :
No need of the backlight
The display is self-illuminating
Power requirement is low
They are offering the large viewing angle
PACKAGE INCLUDES:
1 x 1.3 Inch OLED Display Module 4pin I2C



