Radiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed Wing
8,500.00 ৳
In stock
Radiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed Wing Board Integrated OSD Module for 2-8 axis
Features:
1. High Configuration: STM32F722RET6 master, ICM42688 gyroscope, SPL06-001 barometer 128MB flight log data storage, MPS brand MP2491C switching power supply chip.
2. Optimal PCB layout and alignment: repeated optimization of PCB layout alignment, to achieve the perfect combination of high current and low noise, to ensure the accuracy of the sensor.
3. Multi-model transmission support: standard Dali 6pin transmission interface, snail transmission interface, built-in analog transmission OSD.
4. 3.3V/4.5/5V/12V multi-voltage power supply. 12V transmission power supply can be turned on and off by remote control.
5. Rich interfaces. Support eight-way motor X8 models. Standard sockets and pads all lead out, convenient for users with different needs.
6. Support all kinds of mainstream throttle signals to support the ESC information back to the perfect support for two-way DShot digital throttle communication, OneShot and ordinary PWM signals.
7. Built-in OSD module, one-step parameterization, F722 integrated OSD chip, without external OSD module, you can directly set the OSD parameters in the flight control parameterization software and RC, real-time graphical display of OSD information, such as the direction of flight and the position of the aircraft.
8. 55A 4-IN-1 ESC,3-6S LiPo, Mounting hole size: 30*30 mm ,M3.
Description:
F722 Flight controller: has been designed for optimal control of flight, which allows you to have more control over the flight. Supported models: fixed-wing, helicopter, flying wing, 2-8 axis multi-rotor airplanes including X8 models, and various types of user-made multi-rotor models.
Specifications:
Brand: Bluejay
Name: 55A 4-IN-1 ESC
Input voltage: 3-6S LiPo (11.1-25.2V)
Continuous Current: 55A x 4
Instantaneous current ： 70A x 4 (10s)
Built-in BEC : No
Built-in current sampling: Yes, 11.75mv/A
Mounting hole size: 30*30 mm ,M3
Dimension: 45*45*6 mm
Weight: 33g (with cable)
Brand: Radiolink
Name: F722 flight controller
Main Processor: STM32F722RET6
Gyro: ICM42688
barometer: SPL06-001
Barometer: BMP280
Black Box: 128MB flight log data storage
Switching power supply chip: MP2491C
Multi-voltage power supply: 3.3V/4.5/5V/12V
Weight: 9.5g for single F722 flight controller
Ounting hole distance: 30.5*30.5mm
OSD Chip: AT7456E
Motor Channel: M1-M8
DJI sky terminal plug-in: support
Analog Mapping Inline: Support
Betafight Camera Adjustment Pad: Supported
Voltage scaling: 110
Number of serial ports: 5 sets of serial ports: Supported
ESC Operational Test Input: Support
12C: Supported
LED pads: Supported
Buzzer Pad: Support
RSSI signal pinout: Support
Firmware type: Betaflight
Firmware Name: RADIOLINKF722
USB Port: 1(Type-c)
Controller-by-Controller Signal (RC In port): SBUS/CRSF
Mapping OSD: Support, built-in mapping OSD module
Supported ESC protocols: PWM/Bi-directional Dshot/Oneshot
Power input: 3-6S
BEC: 3.3V/300mA;4.5V/500mA;5V/3A;12V/3A
12V BEC Switch: Supported (USER1 setting)
Supported models: fixed-wing, helicopter, flying wing, 2-8 axis multi-rotor airplanes including X8 models, and various types of user-made multi-rotor models.
Operating temperature: -30~85-C
Package contents:
1*F722 Flight Control
1*55A 4-IN-1 ESC
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Related products
-
Add to cartNodeMcu Lua ESP8266 Board with CP2102 SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Features: 1. Open-source 2. Interactive 3. Programmable …
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Add to cartRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
SP Racing F3 Acro Flight Controller
2,800.00 ৳Add to cartSP Racing F3 Acro Flight Controller The SP Racing F3 Acro Flight Controller gives you all the features you want, whether you’re into FPV racing, acrobatic flying or drone photography. The hardware was designed by the lead developer of Cleanflight to be more capable than the previous-generation STM32F1-based boards after hearing feedback from the Cleanflight …
-
Add to cart
This is universal Glass Fiber Flight Controller Anti-vibration Set Shock Absorber APM/KK/MWC/PixHawk vibration damping mount has a list of useful applications, This provides the free camera mounting to Flight controller isolation. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment. …
-
APM Pixhawk Power Module With XT60
599.00 ৳Add to cartAPM Pixhawk Power Module With XT60 and BEC Specifications: APM Pixhawk Power Module With XT60 is a simple way of providing your APM and pixhawk with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum …
-
Pixhawk PX4 2.4.8 Flight Controller
11,999.00 ৳Add to cartPixhawk PX4 2.4.8 Flight Controller 32 Bit ARM for Multicopters Specification: The board integrates with PX4FMU+PX4IO Pixhawk is with new 32 bit chip and sensor technology Processor: 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit Main frequency: 256K, 168MHZ RAM 32 bit STM32F103 backup co processor Sensor: L3GD20 3 …
