New Rain 320A Brushed Water Cooling ESC
2,200.00 ৳ 2,000.00 ৳
Out of stock
This esc is dual mode design, can be set to forward & brake & reverse mode, or forward & reverse mode, very convenience to switch the mode.
Input :2-3S Lipo or 6-9 NiMH battery
BEC :5V 3A
Continuous current :80A
Transient current :320A
Size: 42x28x24mm (L*W*H)
Include:
1x Brushed ESC
Related products
-
Add to cart
40A Brushless ESC 2-4S With 5V 3A UBEC For RC FPV Drone Functions: – The timing can be changed to adapt it to different brushless motors. – The specially optimized software is perfectly compatible with disc motors. – Multi-rotor controller dedicated core program to meet various functional requirements of multi-rotor. Specifications: Colour: as shown in …
40A Brushless ESC 2-4S With 5V 3A UBEC For RC FPV DroneRead More
-
4pcs LANRC 35A BLHeli_S 2-6S ESC Built-in Programmable RGB LED
4,800.00 ৳3,799.00 ৳Read more4pcs LANRC 35A BLHeli_S 2-6S Lipo ESC Built-in Programmable RGB LED D-Shot 150/300/600 ONESHOT125 for QAV RC FPV Quadcopter Replaceable Parts Features: EFM8BB2F16G processor Support Dshot600, Dshot300, Dshot150, Oneshot125, PWM Pre-Flashed with BLHeli_S 16.7 Firmware 2-6S support 35A: Continuous current 35A, peak 45A/10s Integrated RGB multi-colour bright LED night light, night flight is even more …
4pcs LANRC 35A BLHeli_S 2-6S ESC Built-in Programmable RGB LEDRead More
-
Radiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed Wing
9,000.00 ৳Add to cartRadiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed Wing Board Integrated OSD Module for 2-8 axis Features: 1. High Configuration: STM32F722RET6 master, ICM42688 gyroscope, SPL06-001 barometer 128MB flight log data storage, MPS brand MP2491C switching power supply chip. 2. Optimal PCB layout and alignment: repeated optimization of PCB …
Radiolink F722 Flight Controller with 4in1 55A ESC Stack 3-6S for FPV Drone and Fixed WingRead More
-
L293D Motor Driver Shield
250.00 ৳220.00 ৳Add to cartDescription: L293D Motor Driver/Servo Shield for Arduino This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V ”hobby” servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino”s pin9 and …
-
4pcs Original FVT LITTLEBEE BLlheli-s 30A ESC
4,000.00 ৳3,400.00 ৳Add to cart4pcs Original FVT LITTLEBEE BLlheli-s 30A ESC 2-6S Supports Mulitshot DSHOT Oneshot42 OneShot125 Multicopter Description: Item name: fvt littlebee 30a-s esc Input voltage: 2-6s li-po Checkout: no Continue current: 30a, burst current: 35a up to 10s Size: 35*17mm Weight: 9g (includes power and signal wire) Support damped mode, hot125 ones, hot42 and multshot ones Main …
-
HSKRC BLHeli_S 2-4S 30A ESC 4pcs
4,100.00 ৳Read moreHSKRC BLHeli_S 2-4S 30A ESC 4pcs support DSHOT600 ESC Speed Controller for QAV-X Loki FPV Raing Drone Quadcopter 1.The original genuine components are used to ensure the high quality of the ESC, especially the excellent current resistance. 2. using the new BLHeli-S firmware, the throttle is linear. 3.optimized for multi-axis, and well supported fixed-wing and …







