DIATONE Mamba F405 Flight Controller MK2
3,999.00 ৳
Only 1 left in stock (can be backordered)
DIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter
Specification:
Item name: F405 Betaflight Flight Controller
Input power: 10-28V (3-6S)
BEC: 5V/1.5A
MCU: STM32F405
Gyro: MPU6000
Flash: 16MB
OSD: AT7456
Firmware: Fury F4 OSD
Mounting hole: 30.5*30.5mm
Weight: 6g
Package Included:
1 x DIATONE Mamba F405 Flight Controller
Related products
-
2.4GHz Wireless Module NRF24L01
130.00 ৳ – 330.00 ৳Select options2.4GHz Wireless Module NRF24L01 with antenna or without external antenna Description: The real GFSK monolithic transceiver chip Built-in hardware and link layer Automatic response and automatic retransmission function Address and CRC check function Channel switching time is very short, can be used for frequency hopping Fully compatible with nRF24XX series The global open ISM frequency …
-
Ublox NEO-6m GPS Module
600.00 ৳Add to cartUblox NEO-6m GPS Module Ublox makes good gps. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings. The antenna is connected to module …
-
HC-06 bluetooth module
370.00 ৳Add to cartThis is a bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. The HC-06 module is a slave only device. This means that it can connect to most phones and computers with bluetooth but it cannot connect to other slave only devices …
-
Ublox NEO 7M GPS With Compass
2,200.00 ৳Read moreUblox NEO 7M GPS With Compass Description: – Main chip:U-BLOX NEO-7M – C/A code,1.023MHz – Receiver Frequency:L1 [1575.42MHz] – Locate performance – 2D :3m(Average) – 2D:2m(average),with WAAS – drifting<0.02m/s – accuracy:1us – coordinate system:WGS-84 – max attitude height:18000 – Max speed:515m/s – accerlaration:<4g Specification: – tracking sensitivity:-161dBm – Capture sensitivity:-148dBm – cold start time:38s average …
-
Radiolink SE100 v2 GPS Module with Stand
4,200.00 ৳Read moreRadiolink SE100 v2 GPS Module with Stand Specification: Brand name: Radiolink Item name: M8N GPS Module Positional Accuracy: 1m precision when working with concurrent GNSS, 2.5m precision when working with single GNSS. Velocity precision: 0.1m/s Max height: 50000m Max speed: 515m/s Max acceleration: 4G Max update rate: up to 18Hz Sensitivity Tracking & Nav.: -167dBm; Reacquisition:-163dBm; Cold start:-151dBm; Hot start:-159dBm Time to first fix: Cold start: 26s, Hot start:1s. Power supply: voltage 3.3VDC+-5%, current 50~55mA Ports: A. GPS UART interface, baud rate: 1.2K/4.8K/9.6K/19.2K/38.4K/57.6K/112.5K B.Geomagnetic I2C interface Version: v2 Feature: Top Configuration -GPS decoder chip: Radiolink M8N v2 GPS, with u-blox UBX-M8030(M8), 72-channel, MMIC BGA715L7 from Infineon and 13 years of RF experiences, is much better than single GNSS 7N. A.Concurrent reception of GPS/QZSS L1 C/A,GLONASS L10F, BeiDou B1 B.SBASL1 C/A:WAAS, EGNOS, MSAS – Antenna : 2.5dbI high gain and selectivity ceramic antenna – Power amplify IC: MMIC BGA715L7 from Infineon – Filter: SAWF(Surface acoustic wave filter) form Murata – Geomagnetic: HMC5983 Professional Design Radiolink M8N v2 GPS, benefits from professional wireless experiences of Radiolink engineers, exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement. 1 meter position accuracy, positioning in 23 seconds and valley stationkeeping ability make Radiolink GPS much …
-
SIM900A GSM /GPRS Module + Antenna
900.00 ৳Add to cartSIM900A GSM /GPRS Module + Antenna SIM900A Modem can work with any GSM network operator SIM card just like a mobile phone with its own unique phone number. The SIM900A GSM/GPRS modem is plug and play modem with RS232 serial communication supported. Hence Advantage of using this modem will be that its RS232 port can …
