Aocoda RC F405 V4 Flight Controller
3,999.00 ৳
Only 1 left in stock
Aocoda RC F405 V4 Flight Controller OSD Baro and BalckBox for Racing Drone
Specifications
- MCU: STM32F405RGT6, 168MHz, 1MB Flash
- Board V3.0-ICM Version: IMU: ICM42688 (SPI1)
- Board V3.0-MPU Version: IMU: MPU6888 (SPI1)
- Gyro: ICM42688P(SPI1)
- Baro: SPL06-001(I2C1)
- OSD: AT7456E(SPI2)
- Blackbox: 16MB(SPI3)
- Motor Output: 8ch
- 5x Uarts (1,2,3,4,5)
- 10x PWM outputs(including “LED strip” pad)
- 1x I2C
- 3x ADC (VBAT, RSSI, CURR)
- 3x LEDs for FC Status (Blue, Red) and 3V indicator(Red)
- Built-in inverter for SBUS input
- USB Type-C
- Dual camera input and free switching
- Receiver: ELRS/CRSF/S.BUS/Frsky/Futabayfysky/TBs Crossfre/DSMX
- DJI FPV OSD is supported by any spare Uart
Power
- Vbat Input: 12.6~33.6V (3~8S LiPo)
- BEC: 5V/2.5A, 9V/2.5A(Max.2.7A)
- No built-in Current Sensor
- Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot
Physical
- Dimensions: 37mm*37mm
- Mounting Hole: M3 30.5mm*30.5mm
- Weight: 9.4g
FC Firmware
- BetaFlight: AOCODARCF405V3
- INAV: AOCODARCF405V3
- ArduPilot(ChiBiOS): AOCODARCF405V3
Including
- F405 V4 FC*1
- 8PIN SH1.0mm connection cable*1
- M3 *8 shock-absorbing ball *4
.jpg)
Related products
-
DJI Naza M Lite Flight Controller with GPS Combo
15,999.00 ৳Add to cartDJI Naza M Lite Flight Controller with GPS Combo for RC FPV Drone Quadcopter Original DJI Naza M Lite Multi Flyer Version Flight Control Controller w/ PMU Power Module & LED & Cables & GPS & stand holder All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight …
-
OMNIBUS F4 V3S Plus Flight Controller
3,600.00 ৳Add to cartOMNIBUS F4 V3S Plus Flight Controller F4 V3S Plus Flight controller: Item name: F4 V3 PLUS Flight Controller Firmware: OMNIBUSF4SD Size: 36x36mm Mounting holes: 30.5×30.5mm STM32 F405 MCU Dshot support Drag and Drop OSD configured via Betaflight MPU: MPU6000 (Send at random) SBUS / PPM AND Spketrum DSMX ports MicroSD card blackbox Baro (BMP280) 5v3a …
-
SpeedyBee F405 V3 + 50A 4in1 Stack
8,499.00 ৳Read moreSpeedyBee F405 V3 + 50A 4in1 Stack Flight Controller MCU : STM32F405 IMU(Gyro) : BMI270 USB Port : Type-C Barometer : Built-in OSD Chip : AT7456E chip BLE Bluetooth : Yes, Supported DJI Air Port : 6-pin connector/ direct soldering. BetaFlight Cam Control : Yes(CC pad on the front side) Current Sensor Input : Supported …
-
NX3 Aircraft Flight Controller
2,300.00 ৳Read moreNX3 Aircraft Flight Controller Description: Voltage Range: 5-6V DC. Dimensions: 40mm x 25mm. Weight: 6.5g. Feature: 1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail. 2.Three Flight Modes supported: a. Rate Mode ,Rate Mode for offset correction. b. Hold Mode ,HOLD mode for attitude hold c. Gyro Off Mode,transsmiter control the …
-
Add to cartNodeMcu Lua ESP8266 Board with CP2102 SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Features: 1. Open-source 2. Interactive 3. Programmable …
-
Ublox NEO-6m GPS Module
600.00 ৳Add to cartUblox NEO-6m GPS Module Ublox makes good gps. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings. The antenna is connected to module …
