M10 GPS With External HMC5883L Compass For RC Quadcopter
2,700.00 ৳
In stock
M10 GPS With External HMC5883L Compass For RC Quadcopter
Feature:
- The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems.
- It also comes with the HMC5883L compass.
- The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility.
- PX4 1.14, ArduPilot 4.3, or newer is required.
Satellite system: GPS L1 C/A GLONASSL10F BeiDouB1I/B1C Galileo E1B/C QZSSL1 C/A/S SBAS L1C/A
Number of satellite concurrency: 3
Maximum navigation update rate: 10Hz
Maximum number of navigation satellites: 32
Positioning accuracy (ideal environment): 1.5m CEP
Start-up speed (ideal environment): 26 seconds for cold start and 1 S for hot start
Sensitivity: Tracking & Navigation: -167dBm Recapture: -160dBm Hot Start: -159dBm Cold Start: -148dBm
Hot start support: With backup battery, support hot start
Serial port baud rate: 4800-921600bps, default 115200bps
Output level: 3.3VTTL level
Output protocols: NMEA, UBX
FLASH: Onboard FLASH, which can be saved after configuration modification and will not be lost when the power is off
Height limit: ≤50000m
Speed limit: ≤500m/s
Acceleration limit: ≤4g
Working voltage: DC 3.6-5.5V, typical 5.0V
Related products
-
Ublox NEO-M8N GPS Module
2,200.00 ৳Add to cartUblox NEO-M8N GPS Module Features: Built-in compass GPS module Main chip: Ublox-M8N – With fast satellite searching speed and high precision – Includes round plastic shell and GPS folding support Package size: 15 x 12 x 2cm Package weight: 57g Packing Content: 1 x NEO-M8N Flight Controller GPS Module with Shell
-
DIATONE Mamba F405 Flight Controller
5,500.00 ৳Add to cartDIATONE Mamba F405 Flight Controller STM32 F405 MPU6000 OSD Built-in 5V 1.5A BEC 3-6S for RC FPV Racing Drone Quadcopter Specification: Item name: F405 Betaflight Flight Controller Input power: 10-28V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Firmware: Fury F4 OSD Mounting hole: 30.5*30.5mm Weight: 6g Package Included: 1 x DIATONE …
-
SpeedyBee F405 V3 + 50A 4in1 Stack
8,499.00 ৳Read moreSpeedyBee F405 V3 + 50A 4in1 Stack Flight Controller MCU : STM32F405 IMU(Gyro) : BMI270 USB Port : Type-C Barometer : Built-in OSD Chip : AT7456E chip BLE Bluetooth : Yes, Supported DJI Air Port : 6-pin connector/ direct soldering. BetaFlight Cam Control : Yes(CC pad on the front side) Current Sensor Input : Supported …
-
NX3 Aircraft Flight Controller
2,300.00 ৳Read moreNX3 Aircraft Flight Controller Description: Voltage Range: 5-6V DC. Dimensions: 40mm x 25mm. Weight: 6.5g. Feature: 1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail. 2.Three Flight Modes supported: a. Rate Mode ,Rate Mode for offset correction. b. Hold Mode ,HOLD mode for attitude hold c. Gyro Off Mode,transsmiter control the …
-
KK2.1.5 LCD Flight Control Board
4,300.00 ৳Add to cartKK2.1.5 LCD Flight Control Board (Red Switch) The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than …
-
Ublox NEO 7M GPS With Compass
2,200.00 ৳Read moreUblox NEO 7M GPS With Compass Description: – Main chip:U-BLOX NEO-7M – C/A code,1.023MHz – Receiver Frequency:L1 [1575.42MHz] – Locate performance – 2D :3m(Average) – 2D:2m(average),with WAAS – drifting<0.02m/s – accuracy:1us – coordinate system:WGS-84 – max attitude height:18000 – Max speed:515m/s – accerlaration:<4g Specification: – tracking sensitivity:-161dBm – Capture sensitivity:-148dBm – cold start time:38s average …
