DHT11 Temperature and Humidity Sensor Module
150.00 ৳
Only 1 left in stock
DHT11 digital temperature and humidity sensor module is a composite Sensor contains a calibrated digital signal output of the temperature and humidity. The application of dedicated digital modules collection technology and the temperature and humidity sensing technology is to ensure that the product has high reliability and excellent long-term stability.
Features:
Working voltage 3.3 V-5 V
Humidity measurement range 20 percent -95 percent, humidity measurement error +-5 percent
Temperature measurement range 0 -50, measurement error +-2 degree
Package Included:
1 Sensor Module
3 Female to Female Jumper Wire
Related products
-
L293D Motor Driver Shield
220.00 ৳Add to cartDescription: L293D Motor Driver/Servo Shield for Arduino This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V ”hobby” servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino”s pin9 and …
-
Add to cartThis precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. Specifications: Size: 21mm x 18mm 1.8V …
-
Add to cartW1209 Digital Temperature Controller Switch Module Description: W1209 DC 12V Red LED Digital Heat Cool Thermostat Temperature Control Thermometer Thermo Controller Switch Module + NTC Sensor Specifications: Temperature range :-50-110 ° Dimensions: 48.5 * 40mm Temperature control mode: ON / OFF Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1° Control …
-
Add to cart
LM2596 DC-DC Buck Step Down Converter Module with LCD voltmeter Features: 1. Input voltage range: 4-40 v (40 v to limit the highest voltage). 2. Output voltage range:1.25V – 37V (decompression mode, input output must be greater than 2 V above). 3. Output current: 2 A continuous output. 4. Output power: the maximum 15 w. …
LM2596 DC-DC Buck Step Down Converter Module with LCD voltmeterRead More
-
LDR Sensor Module
55.00 ৳Add to cartLDR Sensor Module Features: Can detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment) Operating voltage 3.3V-5V Easy to use with Arduino Output Type: Analog voltage output -A0 Digital switching outputs (0 and 1) -D0 With fixed bolt hole for easy installation Small board PCB size: 3cm * 1.6cm Power indicator …
