4 in 1 Brushless ESC BLHeli_S Dshot300-600 2-6S
3,600.00 ৳ – 3,800.00 ৳
4 in 1 brushless ESC BLHeli_S Dshot300-600 2-6S 35A / 40A / 45A
35A 4 IN 1 ESC Description:
Brand name: Rcharlance
Item name: 35A 4 In 1 ESC BLHeli_S
Operating voltage: 2-6S Lipo
FC power: integrated
Maximum continuous operating current: 4*35A
Maximum instantaneous operating current: 4*40A
Firmware version: BLHELI_S Dshot 16.5 J_H_xx firmware
Supports Oneshot125 / Multishot42 / Dshot150 / 300 / 600
Supports BlheliSuite configurable
Hole diameter: 3mm
Screw hole spacing: 30.5 * 30.5mm
Weight: about 16g
40A 4 IN 1 ESC Description:
Brand name: JHEMCU
Item name: 40A 4 In 1 ESC BLHeli_S
Operating voltage: 2-6S Lipo
FC power: integrated
Maximum continuous operating current: 40A
Maximum instantaneous operating current: 50A
Firmware version: BLHELI_S Dshot 16.5 J_H_xx firmware
Supports Oneshot125 / Multishot42 / Dshot150 / 300 / 600
Supports BlheliSuite configurable
Hole diameter: 3mm
Screw hole spacing: 30.5 * 30.5mm
Weight: about 18g
45A 4 IN 1 ESC Description:
Brand name: LanRC
Item name: 45A 4 In 1 ESC BLHeli_S
Operating voltage: 2-6S Lipo
FC power: integrated
Maximum continuous operating current: 45A
Maximum instantaneous operating current: 55A
Firmware: BLS J_H_30_REV16_7
Supports Oneshot125 / Multishot42 / Dshot150 / 300 / 600
Supports BlheliSuite configurable
Hole diameter: 3mm
Screw hole spacing: 30.5 * 30.5mm
Weight: about 20g
Package included:
1 x 4 in 1 brushless ESC 35A/40A/45A select from option
1 x 8pin ESC to FC Cable
1 x 14 swg power Cabe
1 x XT 60 connector
| Amp | 35A, 40A, 45A |
|---|
Related products
-
HSKRC BLHeli_S 2-4S 30A ESC
1,050.00 ৳Read moreHSKRC BLHeli_S 2-4S 30A ESC support DSHOT600 ESC Speed Controller for QAV-X Loki FPV Raing Drone Quadcopter 1.The original genuine components are used to ensure the high quality of the ESC, especially the excellent current resistance. 2. using the new BLHeli-S firmware, the throttle is linear. 3.optimized for multi-axis, and well supported fixed-wing and helicopter. …
-
L293D Motor Driver Shield
220.00 ৳Add to cartDescription: L293D Motor Driver/Servo Shield for Arduino This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V ”hobby” servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino”s pin9 and …
-
EMAX BLHeli 40A Brushless ESC
1,400.00 ৳Read moreDescription: Brand Name: Emax Item Name: BLHeli Series ESC Current: 40A Burst :50A Max Lipo Cell: 2-6 Cell Weight: 41g BEC: 3A/5V Features: Based on BLHeli firmware, further optimized to the perfect drive performance. Low-voltage protection, over-heat protection and throttle signal loss protection. Separate power supply for MCU and BEC, enhancing the ESC’s ability of …
-
New Rain 320A Brushed ESC With Cooling Fan
1,800.00 ৳Add to cartNew Rain 320A Brushed ESC With Cooling Fan 5V 3A BEC T-Plug Features: One-piece design ( built electrolytic capacitors ), fully waterproof and dustproof, adapt to climate and environment. Bidirectional operation mode, you can move forward and backward, for a variety of models. High-quality materials, with a strong resistance to current capacity. Powerful BEC output …
-
40A Brushless ESC
800.00 ৳Add to cartThis high quality electric speed controller is perfect for rc boat. It’s 40A brushless motor. . easy operation and safe. Continuous Output Current: 40A Max Current: 50A DC:3.7V-12.8V BEC:3A / 5V (Switch) Size: 45mm x 26mm x 10mm Net Weight:28g High rate PWM : 8K Li-Poly: 2-3 Ni-Mh/Ni-cd:c4-10Ni- MH Color: Yellow Net weight: 31g Package …
